Radio Receiver
₹1,878.08 excl GST
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in […]
BETAFPV Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
₹1,101.69 excl GST
Specifications :-
Model FS-iA6B No. of Channels 6 No. of Band 140 Encoding GFSK. RF Range 2.40552.475 GHz. Rx Sensitivity (dBm) -105 Operating Voltage (VDC) 4.0 ~ 8.4V i-Bus Interface Yes Data Acquisition Interface Yes Antenna Length (mm) 26 Video Format Supported NTSC/PAL Color Black Net weight (gm) 14.9 Dimensions (mm) LxWxH 47 x 26.2 x 15 ₹898.98 excl GST
2.4G 4CH RC Receiver Compatible with D8 D16 With PWM Output for FRSKY T16 X9D Transmitter
Specifications:
- Working frequency: 2400Mhz-2483. 5Mhz
- Working mode: Frequency-Hopping Spread Spectrum
- Working voltage: 4.0V-15V
- Working current: <25mA (+8.0V)
- Output channel: 4CH PWM
- Size: 27.7 x 12.7 x 10mm
₹4,142.37 excl GST
- Operating Voltage Range: 3.5V~10V
- Operating Current: 100mA@5V
- Operating Range: full range (>1.5km)
- Firmware Upgradeable
- Higher precision of PWM
- Lower latency on the PWM output
- Support redundancy function
₹1,321.15 excl GST
The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS.
₹2,201.63 excl GST
₹6,167.73 excl GST
Introducing the TBS Crossfire Sixty9, a VTx and RC receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Crossfire side. Mounting holes are 20x20, but we do incldue adapters for your 30x30 stacks, and a plastic case for mounting the unit to your frame, without any stacking necessity. Outputs 2x CRSF + 2x PWM (or 6x PWM) directly to your FC. The main JST-SH connector connects to your flight controller and video camera (or also FC for those that like the FC-OSD).