Sale!

Combo Deals of 6S Pack (TX16S + Motors + Wrench + Rx + F4 Stack)

36,779.59 30,666.00

Out of stock

  Ask a Question

Emax 4/5.5/8/10MM Nut Wrench Quick Release Propeller Motor Tool for M2/M3/M5/M6 FPV Racing Drone

Specification:
Brand name: Emax
Item name: 4/5.5/8/10MM Nut Wrench Quick Release

Made of high quality 6061 aluminum alloy, CNC machining. Fine workmanship, solid material.
It can be used for M5 and 2205 M5 flange nuts of the 2204 type motor.
Can also be used to install M3 nuts through the fuselage.
A wrench, a variety of uses. Small size, the field is also very convenient to carry.
The new 3 with hex nut quick release wrench, suitable for Yinyan 2204 motor bullet and outer diameter of 4MM/5.5MM/8MM/10MM hex nut.

Note: National standard nuts such as M2/M3/M5/M6 can be used. Please measure the size of the model when purchasing. The size of the non-standard nut may be inaccurate.

Mamba F405 FC

Item name: F405 Betaflight Flight Controller
Input power: 12.6-25V (3-6S)
BEC: 5V/1.5A
MCU: STM32F405
Gyro: MPU6000
Flash: 16MB
OSD: AT7456
Mounting hole: 30.5*30.5mm
Weight: 6g
Target: FURYF4OSD
WS2812 LED Control: BF LED Control
Smartaudio: Yes
RSSI: Yes
Buzz: Yes

Mamba F40 ESC
Item name: Mamba F40HV ESC
Input voltage: 3-6S (12.6V~25V)
Continue current: 40AA×4
Burst current: 40/50A (6S)
BEC: NO
Mounting: 30mm / φM3
Weight: 10g

Emax ECO Series 2306 6S 1700KV 4S 2400KV Brushless Motor for RC Drone FPV Racing

Description:
EMAX ECO series motors comes in 2306/2207 size and in two KV options: 1700KV and 1900KV for 6S battery setups and 2400KV for 4S battery setups. Motors features large 9x4mm size ball bearings, hardened stainless steel hollow shaft, lightweight bell and open base motor design.

Specification:
Brand name: Emax
Item name: ECO series 2306/2207 brushless motor
KV: 1700KV,1900KV, 2400KV (option)
Framework: 12N14P
Length: 30.2mm
Diameter: 27.7mm
No. of cells: 3-4s 2300-2700kv range
No. of cells: 3-6s 1500-1900kv range
Propeller: 5″ – 5.5″
Light Weight: 27.9g (W/O Silicone Wire)
Prop adapter: M5
Bearing Shaft: 4mm
Shaft Thread: CW

Features:
-EZO bearing 9mm ODx4mm ID
-Steel shaft
-Dual anodizing
-16x16mm hole pattern
-Multi copper winding
-115mm 20 AWG silicone wire

RadioMaster TX16S Hall Sensor Gimbals 2.4G 16CH Multi-protocol RF System OpenTX Mode2 Transmitter for RC Drone

Metal Roller and TP Update.

 

Open TX Radio Firmware Click Here
Multi-Module Firmware Click Here
Did you know RadioMaster has warranty support agents in the USA, Netherlands, the UK and Australia? Our agents are also able to help with non warranty repairs if you happen to have a mishap. Choose the brand with real support, choose RADIOMASTER!
https://www.radiomasterrc.com/repair
Description: (User Manual)
Brand Name: RadioMaster
Item Name: TX16S Transmitter

Channel: 16CH
Mode: Mode2
Size: 183*212*66 mm
Weight: 736g (without battery)
Voltage: DC7-8.4V
Battery Compartment: 25*52*97mm
Battery: 2 x18650 (tray included) , 21700 7.4v 2s Pack or 7.4v 2s Lipoly (Batteries not included)
Current: 400mah (excluding external module)
External Micro SD slot: Card Included
2 x External UART Expansion Ports
Touch Panel Ready (requires OpenTX 2.4 and Upgrade Panel Sold seperatly)
Features:
STM32F429BIT6 MCU
Industrial grade 4.3 inch 480*272 outdoor readable color touch panel screen
Compatible with OpenTX
Wheel menu button
Full Size High Quality HALL sensor gimbals with CNC Aluminum Facias
Internal Multi-protocol RF System
Full Speed Native TBS Crossfire support (400K)
Supports Telemetry (Protocol and Receiver dependent)
Memory 16M (can be expanded by Micro SD card)
Voice function
Vibration reminder function
Improved JR module slot
6-Flight Mode Buttons (Pixhawk and more!)
Three-color LED status display
USB-C Charging port.
USB-C Simulator and PC connection port
External UART ports to expand the capabilities of your radio.
Internal Multi-protocol RF System
Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futabas SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan

Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models

RF Chip Data
The TX16S internal RF system features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module most of today’s prominent RF protocols (See RF Chip data below). The RadioMaster internal RF module will support firmware updates directly from the radios Operating system. No complicated update procedures.

FrSky R-XSR Ultra Mini Redundancy Receiver

You can click Here to buy the original connection cable altogether.

ACCESS protocol firmware: Here

OVERVIEW:
The R-XSR is a standalone receiver with all the functions of XSR, in addition, it’s almost 1/3 size and 1/3
weight of XSR receiver. Moreover, there redundancy function is integrated into this tiny receiver
ensures the security, and the IPEX connector makes it more convenient for you to replace antennas.

SPECIFICATION (USER MANUAL):
Dimension: 16*11*5.4mm (L*W*H)
Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range: 4~10V
Firmware Upgradable
Compatibility: FrSky X Series modules and radios in D16 mode

FEATURES:
Ultra mini size and light weight
Support telemetry and Smart Port enabled
Full range
Switchable SBUS/ CPPM signal output
Supports redundancy function
IPEX connector, replaceable antennas

Package included:
4x ECO series 2306/2207 brushless motor user-defined

1* FrSky R-XSR receiver

1 x TX16S/TX16S

1 x USB-C Cable
1 x 18650 Tray
1 x Throttle Return Springs

1 x Nut Wrench Quick Release

1 x Mamba F405 MK2 Betaflight Flight Controller
1 x Mamba F40 HV ESC

1 x Nut Wrench Quick Release

Reviews

There are no reviews yet.

Be the first to review “Combo Deals of 6S Pack (TX16S + Motors + Wrench + Rx + F4 Stack)”

Your email address will not be published. Required fields are marked *

No more offers for this product!

General Enquiries

There are no enquiries yet.