Quadcopter Complete DIY Kit – F450
This is Quadcopter Economy Combo Kit which will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles and […]
This is Quadcopter Economy Combo Kit which will help you become a quadcopter pilot. Simply get out the soldering iron, put on your safety goggles and began soldering. This Economy kit has very good products and is available at affordable cost.
For someone new to the multirotor hobby, putting together your first quadcopter parts list and bringing them home can be extremely daunting. Trying to figure out what to buy and what parts will work together is tough, especially for people who don’t come from a background in radio controlled planes or helicopters. For the people who want to build a quadcopter but don’t know where to start. It can be frustrating trying to sort things and figure out what to do.
We’ve heard from a lot of peoples who are in similar positions and this bunch of products is designed to spell out exactly what you need for your quadcopter build.
Here’s what an Economy Kit contains:
Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
Every quadcopter or other multirotor aircraft needs a frame to house all the other components. Things to consider here are weight, size, and materials. This Q450 QUADCOPTER FRAME is a well thought out 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed of ultra-durable polyamide nylon. This version 3 of the Q450 QUADCOPTER FRAME features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. V3 also comes with stronger molded arms over V1 and V2, so no more arm breakage at the motor mounts on a hard landing.
A2212/10T/13T 1000kv Brushless Motor With Soldered Connector
The motors have an obvious purpose: to spin the propellers. There are many motors suitable for quadcopters, and this A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR is one of them which is included in this kit. Motors are rated by kilovolts, and the higher the kV rating, the faster the motor spins at a constant voltage. The A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR motor for the airplane aircraft quadcopter. A2212 / 13T 1000KV BRUSHLESS MOTOR OUTRUNNER with 80% maximum efficiency, 4-10A max efficiency current, and 12A / 60s current capacity.
Orange HD Propeller Pairs 1045(10X4.5) ABS DJI Black (1CW+1CCW)
The Orange HD Propellers 1045(10X4.5) ABS DJI Black is the high-quality propellers specially designed for multi-copters. These Orange Propellers are light in weight and high strength propeller has a 15° angle design at the end of the propeller to avoid whirlpool while the multi-copter is flying. They are useful in drones as well as in multi-copters. Orange propellers help to improve the air-powered efficiency and aerofoil stability.
30A BLDC ESC Electronic Speed Controller – Quadcopter
The electronic speed control, or ESC, is what tells the motors how fast to spin at any given time. You need four ESCs for a quadcopter, one connected to each motor. The ESCs are then connected directly to the battery. 30A BLDC ESC ELECTRONIC SPEED CONTROLLER is specifically made for quadcopters and multi-rotors and provides faster and better motor speed control giving better flight performance compared to other available ESCs. 30A BLDC ESC ELECTRONIC SPEED CONTROLLER can drive motors which consume up to 30A current. It works on 2S-3S LiPo batteries. It has an onboard BEC which provides regulated 5V(2A max draw) to power the flight controller and other onboard modules. This is useful to control our brushless motors with a 2S-3S LiPo(make sure motor doesn’t draw more than 30A). This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv,2200kv).
KK2 1.5 Flight Controller Board W/ 6050 MPU Board With Atmel 644PA
KK2 1.5 Flight Controller Board W/ 6050 MPU Board With Atmel 644PA is the next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.
The LCD screen and built-in software make install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on-screen prompts!
The KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1.5 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory.
CT6B FlySky 2.4Ghz 6CH Transmitter w/FS-iA6B Receiver
The radio transmitter and receiver allow you to control the quadcopter. There are many suitable models available, but you will need at least four channels for a basic quadcopter. We recommend using a radio with 6 channels, so there is more flexibility.
CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is the popular 6 Channel Radio CT6B manufactured by FlySky. CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER is an entry-level 2.4 GHz radio system offering the reliability of 2.4 GHz signal technology and a receiver with 6 channels.
The CT6B FLYSKY 2.4GHZ 6CH TRANSMITTER radio is a value for money, entry level 6 channel transmitter, ideal for quadcopters and multi-copters that require the 6ch operation. This radio has two retract switches and proportional flap dials in easy reach for channels 5 and 6.
It can be powered by 8 x AA Size Batteries or a 12V Power Supply. It comes with a trainer port to help beginners learn flying.It can be configured by connecting it to the computer. Use the T6config software to configure your radio on a computer.
3S 2200 mah 30C/60C Lithium polymer battery Pack (LiPo) – Quadcopter
Quadcopters typically use LiPo batteries which come in a variety of sizes and configurations. We typically use 3S1P batteries, which indicates 3 cells in parallel. Each cell is 3.7 volts, so this battery is rated at 11.1 volts. LiPo batteries also have a C rating and a power rating in mAh (which stands for milliamps per hour). The C rating describes the rate at which power can be drawn from the battery, and the power rating describes how much power the battery can supply.
3S 30C/60C Lithium polymer battery Pack (LiPo) batteries are known for performance, reliability, and price. Orange batteries deliver the full rated capacity at a price everyone can afford.
Specification and Features ( Quadcopter kit):
- F450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
- Materials: glass fiber + polyamide nylon
- Frame Weight: 280g.
- Height: 55mm
- Colored arms for orientation to keep you flying in the right direction.
- Power distribution board included in this item(inbuilt PCB).
- Pre-threaded brass sleeves for all frame bolts.
- Large mounting tabs on main frame bottom plate for easy camera mounting.
- A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR
- KV: 1000
- MAX Efficiency: 80%
- MAX Efficiency Current: 4-10A (>75%)
- Current Capacity: 12A / 60s
- No Load Current: 10 V : 0.5 A
Propellers 1045(10X4.5) ABS Black (1CW+1CCW)
- Weight (1 pair) : 22 gm.
- Shaft diameter(mm): 7-(Flat Side) and 8-(Round Side)
- Total length : 10 inch (254 mm)
- ABS Material
- Very strong and lightweight.
30A BLDC ESC Electronic Speed Controller
- Current: 30-40 A
- Constant Current: 30 A Maximum (40A for maximum 10sec)
- BEC: 3 A
- Good Speed Control
- Excellent Stability Control
- KK2 1.5 Flight Controller Board W/ 6050 MPU Board With Atmel 644PA
- Needle: straight.
- Power supply: LP2985-3.3.
- Max voltage: 16V.
- Add a 47uF tantalum capacitor.
- Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
- Arduino Compatible!
- Includes 3-axis gyro, accelerometer, along with a high-performance barometer
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
CT6B FlySky 2.4Ghz 6CH Transmitter w/FS-iA6B Receiver
- STICK MODE: Left hand or Right hand
- MODULATION: Frequency Modulation
- ANTENNA LENGTH: 115cm/26mm
- CODE TYPE: PPM/GFSK
- POWER: 12V DC
- RF POWER: Less than 0.8W
- CHANNELS: 6 channels
- High receiving sensitivity.
- 8 model memory, digital control.
- 2200 ZOP Power 11.1V 3S 30C LiPo battery XT60 Plug
- Max Continuous Discharge : 50C
- Discharge Plug : XT-60
- XT60 Male w/ 12AWG Silicon Wire 10cm (1pcs/bag)
- Connector Type: XT60 Male
- Material of Connector: High-Temp nylon
- Length: 10 cm.
- High-Quality Connector
- Designed for heavy duty
- High Power Application
- 10CM Male to Male Servo Lead (JR) 26AWG
- Connector: JR-Style
- Length: 10 cm
- Weight: 5 gm
- High-Quality cable
- One male and one female connector
- IMAX B3AC PRO 10W 2S-3S LIPO CHARGER
- Input voltage: 100-240v ac
- Max.charger current: 3*800ma
- Suitable only for lipo battery.
- Led indicator
- Power on : orange
- Stand by: green
- Charging :red
- Full charge: green
- Size: 100mm*60mm*35mm
- Weight: 180g
1 x F450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
4 x A2212/10T/13T 1000KV BRUSHLESS MOTOR WITH SOLDERED CONNECTOR
4 x Orange HD Propellers 1045(10X4.5) ABS DJI Black 1CW+1CCW- 4pairs
4x 30A BLDC ESC Electronic Speed Controller
1 x KK2 1.5 Flight Controller Board W/ 6050 MPU Board With Atmel 644PA
1 x CT6B FlySky 2.4Ghz 6CH Transmitter w/FS-iA6B Receiver
1x 2200 ZOP Power 11.1V 3S 30C LiPo battery XT60 Plug
1 x Imax B3AC PRO 10W 2S – 3S LiPo Charger
For more such informative content visit : https://insidefpv.com/blogs/
Follow us on Linkedin for latest updates : https://in.linkedin.com/company/inside-fpv
Only logged in customers who have purchased this product may leave a review.